Texas East LiDAR Project
Texas East LiDAR Project
The Texas East LiDAR project was completed for the Texas Water Development Board. Access the data in Equator by clicking below.


The Texas East LiDAR Project
The LiDAR survey of Texas East was completed between December 29, 2016 and May 30, 2018. The
Texas Water Development Board requested the survey, but other stakeholders were involved including the Texas Natural Resources Information System (TNRIS) and Texas Commission of
Environmental Quality (TCEQ).
LiDAR Data Collection
The LiDAR survey was carried out by Fugro and included a total of 3,501 square miles. The major locations in the survey included Greenville and San Jacinto County. The survey was carried out to the USGS Lidar Base Specification 1.2 quality level 2.


LiDAR Data Accuracy
AECOM was hired by the Texas Water Development Board to provide QA/QC on the collected data. They tested non-vegetated and vegetated vertical accuracy and have reported their findings in t his report . The table below shows the vertical accuracy findings (at a 95% confidence level).
Location | Non-vegetated vertical accuracy | Vegetated vertical accuracy |
---|---|---|
San Jacinto | 9.3 cm / 3.7 in | 12.2 cm / 4.8 in |
Sulphur UTM Zone 15 | 9.7 cm / 3.8 in | 9.5 cm / 3.7 in |
Sulphur UTM Zone 14 | 6.6 cm / 2.6 in | 9.5 cm / 3.7 in |
Texas Cities/Towns covered in the LiDAR Survey
The Texas East LiDAR survey covered (or partially covered) the cities and towns listed below:
- Honey Grove
- Sulphur Bluff
- Sulphur Springs
- Emory
- Greenville
- Campbell
- Caddo Mills
- Quinlan
- West Tawakoni
- East Tawakoni
- Shepherd
- Goodrich
- New Waverly
- Coldspring


What if this LiDAR doesn’t cover my project site?
Additional LiDAR data is available, provided by the USGS, in Equator. Read more about it by accessing the USGS Topographic Map page.
Why should I use Equator to access the Texas Central LiDAR Survey?
Best available public LiDAR data and resolution, accessible in minutes
3D mapping platform to view LiDAR point clouds, contours and surfaces on a globe
Export data to the right format and resolution you need for your project
The post Texas East LiDAR Project appeared first on Equator .
Full content in Equator Studios